Switchable Polymerization Triggered by Fast and Quantitative Insertion of Carbon Monoxide into Cobalt–Oxygen Bonds

A strategy that uses carbon monoxide (CO) as a molecular trigger to switch the polymerization mechanism of a cobalt Salen complex [salen=(R,R)-N,N′-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediamine] from ring-opening copolymerization (ROCOP) of epoxides/anhydrides to organometallic mediated controlled radical polymerization (OMRP) of acrylates is described. The key phenomenon is a rapid and quantitative insertion of CO into the Co−O bond, allowing for in situ transformation of the ROCOP active species (Salen)Co^III-OR into the OMRP photoinitiator (Salen)Co^III-CO₂R. The proposed mechanism, which involves CO coordination to (Salen)Co^III-OR and subsequent intramolecular rearrangement via migratory insertion has been rationalized by DFT calculations. Regulated by both CO and visible light, on-demand sequence control can be achieved for the one-pot synthesis of polyester-b-polyacrylate diblock copolymers (Đ<1.15).     

Self-Assembly of Highly Stable Zirconium(IV) Coordination Cages with Aggregation Induced Emission Molecular Rotors for Live-Cell Imaging

The self-assembly of highly stable zirconium(IV)-based coordination cages with aggregation induced emission (AIE) molecular rotors for in vitro bio-imaging is reported. The two coordination cages, NUS-100 and NUS-101, are assembled from the highly stable trinuclear zirconium vertices and two flexible carboxyl-decorated tetraphenylethylene (TPE) spacers. Extensive experimental and theoretical results show that the emissive intensity of the coordination cages can be controlled by restricting the dynamics of AIE-active molecular rotors though multiple external stimuli. Because the two coordination cages have excellent chemical stability in aqueous solutions (pH stability: 2–10) and impressive AIE characteristics contributed by the molecular rotors, they can be employed as novel biological fluorescent probes for in vitro live-cell imaging.     

Li/Garnet Interface Stabilization by Thermal-Decomposition Vapor Deposition of an Amorphous Carbon Layer

Applying interlayers is the main strategy to address the large area specific resistance (ASR) of Li/garnet interface. However, studies on eliminating the Li₂CO₃ and LiOH interfacial lithiophobic contaminants are still insufficient. Here, thermal-decomposition vapor deposition (TVD) of a carbon modification layer on Li_6.75La₃Zr_1.75Ta_0.25O₁₂ (LLZTO) provides a contaminant-free surface. Owing to the protection of the carbon layer, the air stability of LLZTO is also improved. Moreover, owing to the amorphous structure of the low graphitized carbon (LGC), instant lithiation is achieved, and the ASR of the Li/LLZTO interface is reduced to 9 Ω cm². Lithium volatilization and Zr⁴⁺ reduction are also controllable during TVD. Compared with its high graphitized carbon counterpart (HGC), the LGC-modified Li/LLZTO interface displays a higher critical current density of 1.2 mA cm⁻², as well as moderate Li plating and stripping, which provides enhanced polarization voltage stability.     

炭-/石墨烯量子点在超级电容器中的应用

炭-/石墨烯量子点作为新兴的炭纳米材料,因具有独特的小尺寸效应和丰富的边缘活性位点而在高性能超级电容器电极材料的研发方面展现出巨大潜力。针对目前炭-/石墨烯量子点在超级电容器电极材料方面的应用优势和存在的关键问题,本文以炭-/石墨烯量子点、量子点/导电炭复合材料、量子点/金属氧化物复合材料、量子点/导电聚合物复合材料以及量子点衍生炭这些电极材料为脉络,梳理了近年来该领域的发展状况,尝试阐释炭-/石墨烯量子点在电极材料、复合材料和衍生炭电极材料中所起到的关键作用,最后对炭-/石墨烯量子点电极材料的发展进行了展望。本综述以期为炭-/石墨烯量子点基电极材料的研究提供一定参考和依据。     

3kA钕电解槽流场中颗粒受力分析

近年来随着NdFeB永磁的应用发展,对金属Nd质量的要求越来越高,而电解过程碳颗粒运动及溶解对金属质量的影响至关重要。通过理论与数值模拟相结合的方式对流场中不溶于电解液的碳固体颗粒的主要受力类型进行梳理,对其运动轨迹进行数值模拟研究,针对稀土电解槽进行了颗粒-流场的计算及模拟,研究发现曳力及重力是颗粒在电解槽中起主要作用的力。曳力是改变颗粒运动轨迹的影响因素,且曳力随粒径的增大而增大。0.07 mm颗粒粒径是区分主要作用力是重力还是曳力的临界值,颗粒粒径越大,越不利于电解槽得到纯净的Nd单质。对进一步改进电解槽槽型,从而得到质量更好、杂质更少的稀土金属,并对后续各物理场对颗粒的影响提供参考意义。     

静电纺聚偏氟乙烯@硅藻土锂离子电池隔膜的制备及性能

以聚偏氟乙烯(PVDF)和硅藻土为原料,通过静电纺丝法制备PVDF@硅藻土复合纤维膜,用于锂离子电池隔膜。 研究了隔膜的吸液率、热稳定性和电化学性能等。 添加硅藻土可有效提高复合膜的电解液吸收率和电化学性能,其中吸液率可达623.6%,相比于PVDF膜和聚丙烯(PP)膜具有优异的循环性能和倍率性能。     

超高分子量聚乙烯烧结制品的链缠结调控及其对性能影响

利用新的单中心Ziegler-Natta(Z-N)催化剂,通过干预分子链的生长与聚集行为,可获得低缠结的超高分子量聚乙烯(UHMWPE)初生树脂.本研究利用这类低缠结UHMWPE,通过设置不同的烧结温度(Ts)来改变熔体缠结状态,并探讨了链缠结程度对烧结制品结构与性能的影响.实验结果表明TS=220℃下,UHMWPE样品发生显著的复缠,造成高缠结度;而Ts=170℃下,初始低缠结状态能够得以充分保留,从而获得了缠结度具有明显差别的不同样品.示差扫描量热法(DSC)测试表明,在Ts=170℃下,低缠结度有利于在随后等温及冷却结晶过程中生成高熔点(最高达141℃)晶体与高的结晶度(最高达65%).力学测试表明低缠结度制品的综合力学性能显著提升,其中屈服强度提高72%,拉伸断裂强度提升139%,弹性模量提升162%以及断裂伸长率提升36%,实现了同时增强增韧.这就提供了一种从调节链缠结温度实现UHMWPE烧结制品高性能化的新思路.     

长碳链聚酰胺及其共聚物的拉伸诱导结晶

长碳链聚酰胺(LCPA)作为聚酰胺的特殊品种,较长的亚甲基链和极性酰胺基团使其兼具聚烯烃和聚酰胺的双重特性.在加工或使用过程中,拉伸诱导结晶现象对长碳链聚酰胺及其共聚物的强度和弹性行为具有重要影响,深入认识其在外场下的微观结构响应对该材料的设计及制备具有重要意义.围绕拉伸诱导结晶作用,该专论主要基于本团队2010年以来在长碳链聚酰胺及其共聚物的拉伸诱导结晶工作,并综述了国内外的相关研究,涉及拉伸诱导结晶现象、拉伸诱导结晶的影响因素、拉伸诱导结晶与力学性能的构效关系及拉伸诱导结晶的表征方法等方面.     

基于手机光线传感器为检测器的简易光度计的自组装设计

By using light sensors of the cellphone, we build a simple photometer which can be used in quantitative analysis experiments. We have performed 5 replicate measurements of iron with phenanthroline to verify reproducibility and stability. We find the absorbance of the sample has a good linear relationship with the concentrations of iron with a R² value around 0.999 and the RSD of 2.81%. The result is 4.94 μg·mL^-1 with spectrophotometer and 5.11 μg·mL^-1 with our photometer. The photometer is simple, convenient, accurate and realistic by using a phone as detector, which can replace the traditional spectrophotometer in the laboratory class. The students can enhance their understanding of the structure and principle of spectrophotometer by the DIY photometer experiment.